- Place of Origin: Jiangsu, China (Mainland)
- Brand Name: photel
- Model Number: PT-10 1008
- E1 number: 8
- ETH number: 4
- NMS interface: ETH or RS232
- power: AC220V or DC-48V(optional)
- Dimensions: 440 (L)X170(W)X44 (H)mm
- warranty: 2 years
Packaging & Delivery
|Delivery Detail:||3-5 working day|
PT-10 1008 TDMOIP
PT-10 100X TDMoIP with 8 E1,4FE, 1 SFP optical ,TDM over IP converter will transmit E1 signal through IP channel, the IP channel can be the existing wired Ethernet channel or wireless Ethernet bridge channel.
TDMoIP with 8 E1,4FE, 1 SFP optical ,TDM over IP converteradopts UDP format, which supports inner transmission in Ethernet network, and also supports route exchange transmission among network segments. The transmitted E1 can be framed or un-framed format, the E1 interface of the same TDM over IP equipment can be connected with the different remote TDM over IP equipment.
|1||TDMoIP e1 ethernet converter Providing up to 8 E1 interfaces;|
|2||Providing 4 ETH interfaces, herein 2 ETH interfaces are uplink interfaces, and the other 2 ETH interfaces are downlink service interfaces;|
|3||Providing Optical ETH uplink interface;|
|4||Having the high transmission efficiency, and the transmission delay can be adjusted;|
|5||Supporting point to point, point to multi-point transmission;|
|6||Supporting E1 framed, unframed setting;|
|7||Supporting E1 loss alarm indication;|
|8||Adopting UDP encapsulation, and supporting different types of Ethernet transmission channels;|
|9||Supporting Ethernet PING package function;|
|10||Ethernet supports 10/100M self-adaptive,half/full duplex self-adaptive|
|11||Supporting E1 package QOS assurance;|
|12||The equipment firmware and software supports remote update function;|
|13||Dual power protection, support AC220V or DC-48V(optional).|
1.Point to point network
Photel has the design ability in the equipment of SDH, PDH, PBX, IPPBX, PCM, TDMOIP, HDSL...
1, for the SDH, we had the tech of STM-1 to STM-64 in hand, so we can modify any function to follow the customer needed;
2, for PDH, the uplink optical rate can be 150M or 1.25G, the number of E1 can be 1-16, the ethernet can be FE and GE;
3, for PBX, our PBX can support the protocols of SS7, PRI, V5, R2, it can work as a central switch in the telecom network, it can translate different protocol each other, for eaxmple SS7 to PRI;
4, for IPPBX, we can have IPPBX function in our PBX, we only need to configure one or more IPS card in our PBX to have IPPBX function, IP phone can communicate with analogue phone by dialling;
5. for PCM, we have enough experience in PCM for any customer;
6, for TDMOIP, we have the tech of TDMOIP for 1 to 16 E1s, we have done this solution in FPGA to reduce the cost and easy in components buying;
7, for HDSL, our HDSL is in low cost design, and have good ferformance.
if any requirements from your customers or yourself, please tell us any time, we will do our best for you!