• Sourcing Solutions
  • Services & Membership
  • Help & Community

Quick Details

  • Place of Origin: Jiangsu, China (Mainland)
  • Brand Name: photel
  • Model Number: PT-10 1008
  • warranty: 2 years
  • Power Consumption: ≤10W
  • Dimensions: 440 (L)X170(W)X44 (H)mm
  • E1 Interface: 75Ω OR 120Ω
  • E1 number: 4E1 or 8E1
  • ETH number: 4
  • NMS: RS232 and ETH
  • Power supply: 220VAC or -48VDC
  • OEM: Support

Packaging & Delivery

Packaging Details standard export package
Delivery Time 3-5 working days after payment

                                    TDMOIP E1 to Ethernet Protocol Converter 



Brief Introduction 
      PT-10 100X  TDM over IP gateway Ethernet to E1 Converter  will transmit E1 signal through IP channel, the IP channel can be the existing wired Ethernet channel or wireless Ethernet bridge channel. 
      IP encapsulation adopts UDP format, which supports inner transmission in Ethernet network, and also supports route exchange transmission among network segments. The transmitted E1 can be framed or un-framed format, the E1 interface of the same TDM over IP equipment can be connected with the different remote TDM over IP equipment.






Main Features
1Providing up to 8 E1 interfaces
2Providing 4 ETH interfaces, herein 2 ETH interfaces are uplink interfaces, and the other 2 ETH interfaces are downlink service interfaces;
3Providing Optical ETH uplink interface;
4 Having the high transmission efficiency, and the transmission delay can be adjusted
5Supporting point to point, point to multi-point transmission;
6Supporting E1 framed, unframed setting;
7Supporting E1 loss alarm indication;
8Adopting UDP encapsulation, and supporting different types of Ethernet transmission channels;
9Supporting Ethernet PING package function;
10Ethernet supports 10/100M self-adaptive,half/full duplex self-adaptive;
11 TDM over IP gateway Ethernet to E1 Converter Supporting E1 package QOS assurance;
12The equipment firmware and software supports remote update function;
13Dual power protection, support AC220V or DC-48V(optional).



E1 over Ethernet Converter, TDM over IP



Equipment Models
       Model                  E1 Number
   PT-10 1001                     1
   PT-10 1002                     2
   PT-10 1004                     4
   PT-10 1008                     8


Technical Specification
Ethernet   interfaceEthernet complies with IEEE 802.3 relatedre commendations, supports 10/100M self-adaptive, half/full duplex self-adaptive;
E1 interfaceIt complies with ITU-T G.703suggestions, the impedance is 75Ω, it adopts Q9 connector
NMS port ETH port or RS232 port, when adopting ETH NMS mode, it can manage any equipment inside the network;
Power consumptionless than 10W.
Working temperature-10C to 50C
Humidity  ≤90%(non-condensation).



Typical applications



1.Point to point network








2.Point to multipoint network









company show

Photel has the design ability in the equipment of SDH, PDH, PBX, IPPBX, PCM, TDMOIP, HDSL...

1, for the SDH, we had the tech of STM-1 to STM-64 in hand, so we can modify any function to follow the customer needed;

2, for PDH, the uplink optical rate can be 150M or 1.25G, the number of E1 can be 1-16, the ethernet can be FE and GE;

3, for PBX, our PBX can support the protocols of SS7, PRI, V5, R2, it can work as a central switch in the telecom network, it can translate different protocol each other, for eaxmple SS7 to PRI;

4, for IPPBX, we can have IPPBX function in our PBX, we only need to configure one or more IPS card in our PBX to have IPPBX function, IP phone can communicate with analogue phone by dialling;

5. for PCM, we have enough experience in PCM for any customer;

6, for TDMOIP, we have the tech of TDMOIP for 1 to 16 E1s, we have done this solution in FPGA to reduce the cost and easy in components buying;

7, for HDSL, our HDSL is in low cost design, and have good ferformance.



if any requirements from your customers or yourself, please tell us any time, we will do our best for you!


customer photos


Packaging & Shipping



1.We are Factory and support OEM; 

2. More Than 20 Years Professional Experience. We Are Always Here For You;

3. Best Quality & Best Service with Competitive price;

4. All products have been checked and packed in good condition before dispatch, let us win-win;

5.Warranty  period: two years;

6.We answer all your enquires in 8hours or less guaranted.












Transaction History of the Supplier

Below is the information about the supplier's transactions conducted via Alibaba.com. If you require further details regarding the transaction data, please contact the supplier directly.

Transaction Overview


Transaction Details

This supplier has completedtransactions with buyers from .

Shipping Destination
Transaction Value
Transaction Date
Email to this supplier
China (Mainland) | Manufacturer, Trading Company
Transaction Level:
Supplier Assessments:
8 Transactions 50,000+
The supplier’s transactions conducted via Alibaba.com in the past 6 months.
The supplier supports Trade Assurance – A free service that protects your orders from payment to delivery.
Supplier's Trade Assurance Limit: US $58,000
Learn More